MA SERIES

Show all

MA SERIES

  • Product Code : POWER AMPLIFIER
  • Stock Status : Yes

MA Series Description The POPE Professional® MA-7200 is 2U and MA-8200 is 3U, high performance power amplifier designed to meet the most stringent needs of professional use in concert touring, high quality sound reinforcement and professional fixed installations. This amplifier is fully comparable with the other Professional Series amplifiers.
Category:

Enquiry Form

Description

MA Series

Description

The POPE Professional® MA-7200 is 2U and MA-8200 is 3U, high performance power amplifier designed to meet the most stringent needs of professional use in concert touring, high quality sound reinforcement and professional fixed installations. This amplifier is fully comparable with the other Professional Series amplifiers.

Description

The POPE Professional® MA-7200 is 2U and MA-8200 is 3U, high performance power amplifier designed to meet the most stringent needs of professional use in concert touring, high quality sound reinforcement and professional fixed installations. This amplifier is fully comparable with the other Professional Series amplifiers.

power amplifiers ma

Features

  • Enhanced protection
  • Precise power amp output
  • 4 forced air cooling fans system
  • 2mm thick "In-One" rugged steel chassis - durable, strong, and easy for maintenance
  • Advanced power supply technology
  • Class H architecture
  • Automatic gain control (AGC) circuit, decrease distortion
  • 2-channel Stereo, bridge mono or parallel connection

Application

The MA Series Amplifiers can use stadium, dance hall, concerts and touring live performances.

Power Output

Ratings (RMS @ 1% THD @ 230VAC)

ModelMA-7200MA-8200
Article No.#10011#10012
Number of channels22
Total output all channels driven3000 W @ 4 ohms4600 W @ 4 ohms
Max. Output Power4 ohms8 ohms4 ohms8 ohms
Per channel watts1500 W950 W2300 W1500 W
Bridge Mono3000 W1900 W4600 W3000W

Specifications

Frequency Response±0.1 dB from 20 Hz to 20 kHz at 1 watt
Phase Response±10 degrees from 10 Hz to 20 kHz at 1 watt
THD0.05%
Intermodulation Distortion
(IMD)
<0.35% (60 Hz and 7 kHz at 4:1, from full rated output to -30dB)
Signal-to-Noise Ratio>105 dB A-weighted or 100 dB unweighted below rated power, 20 Hz - 20 kHz.
CMRR (20 Hz to 1 kHz)> 55 dB, typically > 70 dB
Crosstalk> 80 dB (below rated power, 20 Hz to 1 kHz)
Slew Rate80V/usec
Damping Factor>2,000 from 10 Hz to 400 Hz
Input Impedance (Nominal)20KΩ Balanced
Signal InputTwo balanced 3-pin female XLR connectors
Signal OutputParallel two balanced 3-pin male XLR connectors
Input Sensitivity gain0.775 / 1 / 1.44 Volt
Output CircuitryClass H
Output ConnectorTwo sets of Red & Black color coded binding posts & two Neutrik® Speakon® 4 pole chassis connector
ConnectorsNeutrik® 3-pin XLR, Neutrik® Speakon® 4 pole chassis connector
LED IndicatorPower, Signal, Protect, Clip
ProtectionProtected against shorted, open or mismatched loads, overloaded power supplies, excessive temperature, chain destruction phenomena, input overload damage and high-frequency blowups. Also protect loudspeakers from input/output DC and turn-on/turn-off transients
Cooling SystemInternal heat sinks fitted with four variable speed fans for uniform heat dissipation from rear to front air flow
ConstructionSteel chassis with durable black powder coat finish
Power SupplyToroidal Transformer
Power Range200 - 240VAC @ 50Hz
MainsPowercord
Input Power (Watts)

1600W

1900W

Dimension (W x D x H)

482mm × 443.5mm × 88.8mm

482mm × 468mm × 132mm

Size

2U

3U

Net Weight

22.5 Kg (49.6 lbs)

32.1 Kg (70.1 lbs)

Gross Weight

26.2 Kg (57.7 lbs)

36.0 Kg (79.3 lbs)

Share13